MARYLEBONE / STANDARD FURNITURE, REAL ROOM DETAILS
An alcove measurement is only the start of the fit check.
A cabinet beside a chimney breast may meet skirting, a sill or a return wall before it reaches its planned position. Show your Marylebone recess from both sides with the product dimensions.
ALCOVE PLANNING IN BRIEF
THE ROOM MUST ALLOW CONSTRUCTION, NOT ONLY PLACEMENT
The cabinet may eventually stand between return walls, but its loose panels and assembly sequence can need a wider area. Do not equate a close final fit with a feasible construction space.
Compare manufacturer requirements with the room’s clear floor, ceiling detail and openings. Include obstacles around the recess, such as radiators or existing furniture, without assuming they can be altered.
Large furniture is normally built in its eventual room when suitable. Making a standard cabinet fit by trimming panels, moving existing pieces or dismantling old storage is not automatically included.
MARYLEBONE / ALCOVES AND RETURN WALLS
An alcove can narrow further back or meet a projecting sill. Photograph both side walls and the floor junction, rather than relying on the opening width alone.
A standard freestanding unit may leave a visible gap in your Marylebone room. Assembly follows the product design; cutting, scribing or custom fitting should be treated as separate requirements.
BRING THE ROOM MEASUREMENTS WITH THE MODEL
Show the recess at floor level and cabinet height, including skirting, sockets and nearby openings.
Use its exact model and instructions to establish dimensions, door movement and components. A photograph of a similar fitted cabinet does not describe a freestanding product.
MODEL · QUANTITY · INSTRUCTIONSConfirm delivery completeness against the order and keep labels visible. Tell us about absent cartons or damaged packaging before the appointment.
PACKAGE COUNT · DELIVERY COMPLETEInclude a broad room view, clear construction space and the route indoors. State floor level, stairs or lift arrangements and any further carrying needed.
FINAL POSITION · SPACE · ACCESSCHECK THE PIECE YOU HAVE CHOSEN
Select the category for useful product details. Assembly follows the supplied furniture design; fitting a standard product into a room does not imply bespoke alterations.
Give the wardrobe’s complete dimensions and door system, with photographs of the recess and any projection. Include interior accessories and required restraint instructions.
Send the wardrobe and recess details ↗A tall wardrobe needs clearance where it actually stands, not only at the alcove entrance. Supply its model, internal configuration and anti-tip requirements.
BEDROOM / FRAME & MECHANISMSIdentify the bed model and any drawers or lifting base. Nearby recess furniture may affect the space needed to build and operate the frame.
BEDROOM / SMALL FURNITUREFor bedside storage beside a return wall, consider the drawer or door opening. Include each unit’s model and keep its fittings separately labelled.
STORAGE / RUNNERS & ALIGNMENTA chest’s handles and extended drawers may project beyond the recess. Send its exact specification and manufacturer restraint details before treating it as a flush fit.
DINING / LIVING SPACEProvide the table model and any extending sections. A corner position must still allow the top to be handled during assembly and used normally afterwards.
HOME OFFICE / WORKSPACEA desk in an alcove needs space for the seated user, not just the top. Include pedestal drawers, cable components and nearby sockets in the brief.
DINING / HOME OFFICEList chair quantities and models, especially if an office chair is intended for the alcove desk. Adjustable seating differs from a dining-chair frame.
LIVING ROOM / MODULAR STORAGEShow each storage unit’s position around the room feature. Connections and restraint must follow its instructions; assembly does not make freestanding modules into fitted joinery.
SUITABLE FREESTANDING FURNITURESupply the specification for freestanding shelves, including anti-tip requirements. Shelving built into an alcove or fixed directly to walls needs separate assessment.
MORE THAN ONE ROOMList all furniture and destination positions together. A bedroom cabinet, desk and bedside units may share the same temporary panel layout area.
CONSIDER THE ROOM AROUND ITS FEATURES
Show the bed as well as the wardrobe alcove when planning the build. Long panels may need the floor that would otherwise hold new bedside units.
Photograph the full wardrobe wall with both sides of the recess visible.
Share my recess and room photographs ↗A chest beside a chimney breast can affect the route along the bed. Include the complete bedroom furniture list and the opening directions of the storage fronts.
Show the space between the bed and the intended storage position.
LIVING ROOMReturn walls, skirting and neighbouring seating can affect how living-room doors and drawers operate. Explain existing furniture that requires separate moving work.
Include both side clearances and the route past the cabinet.
HOME OFFICECheck pedestal positioning and chair movement alongside the desktop dimensions. Supplied cable features and socket projections should be visible in the enquiry.
Show the desk recess at floor level, with its nearby sockets.
DINING AREASend the table’s extension details and chair count. A neat closed position does not describe its largest configuration or the handling area needed for construction.
Photograph the table position with surrounding doorways included.
STANDARD PRODUCTS HAVE SPECIFIC CLEARANCES
Doors, handles, drawers and interior fittings affect the build and how the unit works near a room feature.
| Furniture type | Product details affecting the work | Room information to pair with them |
|---|---|---|
| Wardrobe | Overall height, doors and interior accessory configuration | Recess dimensions and manufacturer restraint information |
| Bed | Base structure and under-bed moving components | Frame position with neighbouring storage clearances |
| Desk | Desktop, pedestals and cable-management fittings | Alcove depth and usable seating space |
| Storage | Cabinet connections, hinges and drawer systems | Arrangement around projections and return walls |
ASSEMBLY AND BESPOKE FITTING ARE DIFFERENT SCOPES
Use Alesta’s bands for assembling the supplied furniture, then request a quote with the model and room details. A request to alter a cabinet for an alcove is not assumed within standard assembly.
A straightforward small item has this starting guide.
Typical guide band for beds, desks and medium storage.
Starting level for a large wardrobe or multiple-item project.
| Service scope | Price guide | Details influencing the assembly quotation |
|---|---|---|
| Small furniture item | From £30 | Small-product design and the supplied component set |
| Bed, desk or medium storage | Typically £60–£150 | Fittings, mechanisms and room access for the work |
| Large wardrobe or multi-item project | From £300 | Large frames, combined item scope and agreed anchoring |
Furniture supply, transport, existing-item moving and packaging removal are not automatic inclusions. Custom trimming or fitting needs a separate discussion rather than being treated as a finishing step in assembly.
VERIFY → PREPARE → CONSTRUCT → ADJUST → REVIEW
Match the cabinet reference, instructions and expected packages before proceeding.
Prepare protected working floor outside the tight final position where needed.
Support the components and follow the manufacturer’s assembly sequence.
Confirm the frame before adjusting relevant doors, drawers and shelf fittings.
Review normal operation and stability, explaining any unresolved component or restraint requirement.
A FLUSH LOOK IS NOT THE ONLY CHECK
A visible gap beside a standard cabinet does not mean the hinges are wrong. Establish the frame geometry first, then use the adjustments designed for its doors and drawers.
Set door fronts using their supplied hinge adjustment, not by forcing them against a wall.
Check drawer engagement and travel in the intended cabinet position.
Correct fittings and adjustable supports where provided help the unit sit as designed. Normal-use checks do not turn freestanding furniture into bespoke fitted joinery or waive restraint requirements.
WALL FIXING / ANTI-TIP
A cabinet surrounded by walls may still need the manufacturer’s anti-tip restraint. The actual wall at the fixing position must be assessed; close placement alone is not anchoring.
Suitable wall work needs agreement and cannot be assumed included. If mandatory restraint is outstanding, the furniture must not be treated as usable simply because it sits neatly in the alcove.
Identify the affected panel or fitting against the instructions. A manufacturer replacement may be necessary before the furniture can be completed.
Do not improvise a different screw or modify a damaged joint to make progress. Keep labels and model information available to trace the correct part.
FROM STANDARD PACKS TO CHECKED FURNITURE
The drawings illustrate preparation, assembly and review, not custom fitting stages.
Keep labels readable and match the full order to its components.
Support panels and organise fittings in the prescribed sequence.
Check alignment, normal operation and outstanding safety requirements.
Illustrative furniture scenes, not a customer’s before-and-after alcove installation or proof of fitted work.
DESCRIBE THE ROOM WITHOUT ASSUMING ALTERATIONS
Show both sides of the furniture position, including projections or uneven surfaces. A clear property description helps distinguish assembly from changes to the room or product.
If you want a standard cabinet to occupy an alcove, provide dimensions and accept that gaps may remain. Ask separately about alterations rather than assuming they accompany assembly.
Supply product references and access details for the intended rooms. Resolve any required anchoring permissions and keep bespoke fitting requests outside the ordinary furnishing list.
Discuss relevant fixing permission for any restraint-required storage. A freestanding description or a close recess fit does not remove the manufacturer’s anchoring obligation.
YOUR MARYLEBONE ROOM AND ADDRESS
Include the floor, entry arrangements and carton location, with stairs or lift restrictions. Mention any further carrying required before the furniture reaches its intended room.
Send my Marylebone model and room details ↗Service-area map
The Google map loads when you select this view.FREESTANDING STORAGE BESIDE ROOM FEATURES
For Marylebone furniture assembly, pair product details with the actual recess, corner or wall where the unit will stand.
Measure the intended position at floor level and around the cabinet’s top, noting skirting, sockets and projecting sills. Show both side walls and compare these details with the supplied product dimensions.
No bespoke alteration should be assumed. A freestanding product may leave gaps. Clear enough protected floor for its construction and identify any separate trimming, old-furniture moving or dismantling requirement.
The supplied model, access and agreed work determine the quote. Guide prices are from £30 for small items, typically £60–£150 for beds/desks/medium storage, and from £300 for large wardrobes or multi-item projects. Custom fitting is a separate question.
Check all expected packages, including fronts and interior accessories, against the delivery list. Keep labels visible and flag missing or damaged cartons; the main frame pack may not contain a complete product.
Do not assume the finished structure can reach its destination through the intervening route. Normally assembly belongs in the final room, with sufficient space for the manufacturer’s construction process.
Its drawers or lifting components need their own build and operation space. Send the exact base reference and show neighbouring alcove furniture, rather than describing only the mattress size.
Keep their packaging intact and identifiable instead. Verify delivery completeness and clear the working area; stacking loose parts into the final gap can obstruct construction and obscure their labels.
Yes, if every model, quantity and room position is listed. Their assembly areas may overlap, so the complete order matters even when each finished piece fits its own recess.
Describe the entrance, floor, stairs or lift restrictions and any difficult internal turns. State the delivery point and separately request carrying if the cartons are not already at the assembly room.
No. Follow the manufacturer’s anchoring directions. The actual wall, suitable fixings, hidden services and relevant permission must be assessed before agreed work, and mandatory restraint must be met before use.
Identify it against the product’s part information. The correct manufacturer replacement may be required before completion; arbitrary hardware or concealed modifications should not be used to work around the problem.
PLAN THE STANDARD PRODUCT AROUND THE REAL ROOM
Send the Marylebone recess measurements, furniture model and access information to discuss a clearly scoped assembly.
