Work completed
Identify rooms released after the last dusty task.
South Kensington · Use the clear floor before furniture arrives
South Kensington After Builders Cleaning Before Delivery
Use the clear floor before furniture arrives.
Inspect the floor perimeter while it remains accessible.
The interval after renovation and before delivery is useful for seeing room edges properly. For your South Kensington enquiry, describe the empty flat awaiting furniture. Check the floor care guidance rather than choosing a cleaning method from appearance.
- Include parquet edges and doorway transitions in the surface notes.
- Check the floor care guidance rather than choosing a cleaning method from appearance.
- Sequence the visit with delivery access so boxes do not occupy the work route.
- Inspect the floor perimeter while it remains accessible.
PROPERTY / SOUTH KENSINGTONFINISHING BRIEF
ProjectRenovation complete
Next stageDetailed clean
GoalReady for use
Rooms → agree scopeSurfaces → check finishAccess → confirm
Illustrative renovation scene; no customer job or measured result is represented.
Start with the work
Start with the renovation that has finished
Select the work closest to yours to organise the enquiry. A selection does not confirm the full scope or availability.
Full renovation
A full refurbishment brief should identify finished areas, remaining obstructions and materials that cannot share one cleaning method.
Beyond the work zone
Trace what settled outside the work area
Check where the last tools were carried out.
Look at the last surface a contractor passes when leaving the room. That edge can help reveal whether the cleaning boundary should extend.
Surface-aware cleaning means lifting deposits with appropriate equipment rather than treating every room as an identical wipe-down.
If more dusty work is planned, discuss a different order before fixing the appointment.
South Kensington / the specific room brief
Use the clear floor before furniture arrives
The interval after renovation and before delivery is useful for seeing room edges properly.
This South Kensington planning example centres on flat renovation before furniture delivery. The interval after renovation and before delivery is useful for seeing room edges properly. The useful inspection route follows the empty flat awaiting furniture, with attention to parquet edges and doorway transitions.
Check the floor care guidance rather than choosing a cleaning method from appearance. Keep any care notes for new parquet available when discussing the visible marks.
Sequence the visit with delivery access so boxes do not occupy the work route. Inspect the floor perimeter while it remains accessible.
A scoped quote
Price the work that remains
From £29/ hour
Confirm the rate applicable to the enquiry; cleaning equipment and materials form part of the service.
Time can change with fittings, dust and access restrictions. Do not read the starting guide as including every additional service.
| Project | Pricing basis | What to describe |
|---|---|---|
| Smaller refurbishment | From £29/hour; scope confirmed | Decorated areas and remaining deposits |
| Kitchen or bathroom work | From £29/hour; scope confirmed | Deposits around fixtures and thresholds |
| Whole-property renovation | Quote after the room scope is reviewed | Sequence, size and intended next use |
| Commercial refurbishment enquiry | Availability and scope need review | Site requirements and the enquiry contact |
Based on Alesta’s published after builders cleaning rate. Building waste removal is quoted separately.
The final-stage sequence
Close one stage before opening the next
Detailed clean
Work through scoped surface and floor tasks.
Final review
Compare completed detail with the agreed priorities.
Coordinate the next step
Coordinate the intended return to the rooms.
Different interiors illustrate the process rather than a guaranteed transformation.
The dust route
Map accessible detail before counting rooms
Use the illustration to organise questions, not as an inclusive service checklist.
Ledges & surfaces
External shelves and sill tops can reveal deposits missed from the doorway.
Frames & edges
Room edges often need a deliberate check after the larger surfaces look clear.
Fittings & fixtures
A bathroom fitting needs a different surface description from a painted radiator.
Floors & adjoining rooms
Connect the room being cleaned with the passage used during the renovation.
Different issues / different scope
Separate loose deposits from bonded marks
| Post-build issue | Example | How it is approached |
|---|---|---|
| Fine dust | Fine material along the room perimeter | Method and reach follow the surface list. |
| Loose cleaning remnants | Small surface deposits after the work | Discuss the extent alongside the other surface work. |
| Adhesive or labels | Transfer left on a cabinet coating | Installer information may be needed before treatment is agreed. |
| Paint, plaster or cement spots | Bonded spots beside completed work | No promise is made that every bonded mark will lift. |
| Protective film | Film remaining after the installer leaves | Ask the installer and Alesta before treating this as waste. |
Two separate jobs
Clear the materials before scoping the surfaces
The room-cleaning scope
Room detail belongs in the clean where agreed, including ordinary dust and suitable accessible surfaces.
Materials requiring collection
Explain what bulky items remain before a quote is agreed, so cleaning is not confused with removal.
Discuss building waste disposal ↗Different project briefs
South Kensington: choose the relevant project detail
The return to an empty flat
An empty flat still needs its approach and connecting spaces included where dust is visible.
A refitted kitchen
External units and surrounding floor edges can need attention after installation.
A renovated bathroom
A newly fitted bathroom needs coating and sealant information with its room list.
The whole-home room schedule
Group the agreed rooms by readiness, not only by floor level.
Letting after refurbishment
Keep agent requirements separate from the renovation-cleaning scope for review.
Premises access to assess
Provide the fit-out details without treating this page as a commercial contract offer.
A useful distinction
Release the rooms before arranging the clean
Builder stage
Close the dusty work
- Make the dust-producing timetable clear before booking.
- Arrange for materials to be cleared from accessible surfaces.
- Check readiness using paint and sealant instructions.
Cleaning stage
Prepare access to the surfaces
- Give the team a clear room list and entry arrangement.
- Flag existing damage so it is not mistaken for dirt.
- Record anything needing installer or specialist advice.
Room-by-room brief
Four room types, different cleaning detail
Kitchen
A new worktop and surrounding cabinets need their materials noted, with cleaning limited to the agreed accessible detail.
Bathroom
Bathroom floor care follows the material, while new coatings and seals need their own instructions.
Bedrooms
Make the accessible bedroom detail explicit, particularly where renovation deposits reached a room that was otherwise protected.
Living areas
A clear living-area brief distinguishes construction deposits from unrelated household cleaning.
Protect the new finish
Let the surface guide the cleaning decision
Illustrative surface review.
Newly installed does not always mean ready to clean.
Separate loose dust from bonded material. Safe treatment depends on both the deposit and the finish, and specialist work may need another quote.
Paint & sealants
Confirm readiness with the installer where paint or sealant was applied recently.
Stone, timber & tiles
Name the actual material; a stone-effect surface is not necessarily stone.
Metal, glass & cabinetry
Point out delicate hardware rather than grouping it under general dust.
At a glance
The practical questions, answered briefly
- Where does the price discussion start?
- £29/hour is the advertised starting point. Explain the surfaces, dust and access so the required work can be assessed.
- Which surfaces can form the brief?
- Only the areas agreed for cleaning are covered. Name surfaces, fittings and adjoining spaces that the renovation affected.
- What should happen before cleaners arrive?
- Finish the dusty stage first. Clear working access and check drying instructions before settling the cleaning date.
- Will plaster marks definitely come off?
- No blanket removal promise is made. Alesta assesses the deposit against the surface before discussing a safe approach.
- Are boards and timber part of the clean?
- Loose cleaning residue is distinct from construction materials. Ask separately about what needs collection.
- Does kitchen installation need a separate room brief?
- Kitchen detailing is available within an agreed scope, with the condition of new surfaces checked first.
- Should fresh paint be mentioned?
- The scope can follow decoration, provided the finishes have dried appropriately and the tasks are agreed.
- Can the duration be fixed in advance from room numbers?
- Time depends on dust, access and fitted detail as well as size. There is no universal duration for every renovation.
- Are windows included by default?
- Separate glazing from general room dust in the enquiry; unusual access and bonded deposits affect the scope.
- What must the contractor take away?
- Release the agreed surfaces by clearing tools and construction materials, then flag any bulky waste that still needs collection.
Build your brief
Build a room brief, not an instant price
Use the questions to collect the essentials.
No information is sent by the planner. It helps describe the work without offering an automatic price.
Use the output alongside material notes and access information; it cannot replace an assessment of the cleaning scope.
Discuss the brief: 020 3608 3976Who is planning the handover?
Set out the next use and the decision-maker
Homeowners
Share your practical return-to-use plan without assuming the visit includes unrelated domestic tasks.
Landlords & property managers
An owner or managing agent should identify the renovated areas and access arrangements before assuming a particular handover package.
Builders & contractors
Describe the proposed coordination without presuming it is offered under a standard contract; project suitability requires direct confirmation.
Glass after renovation
Which glass faces need attention?
Describe frames separately where they carry dust while the glass has bonded construction marks.
A fixed deposit may not be safely removable from the glass finish. Identify it before agreeing ordinary window work.
Plan separate window cleaning ↗Service-area planning
Service enquiries for South Kensington
Use the map to locate the South Kensington service area, not an Alesta branch. Provide the actual address when asking about access and appointment availability.
For another nearby area, contact Alesta through the main after builders service to confirm coverage and availability.
After Builders Cleaning Near South Kensington
Before the appointment
Questions about planning the South Kensington clean
What should my South Kensington renovation enquiry include?
Use the renovation as the starting point, then describe the detail it left behind. A room name alone does not explain whether the work affected exposed ledges, fittings or nearby circulation. The interval after renovation and before delivery is useful for seeing room edges properly.
How can I make the cleaning route clear?
A clear access note reduces uncertainty about the visit. Include the entry arrangement and any part of the route that still contains construction equipment or household storage. Sequence the visit with delivery access so boxes do not occupy the work route.
What care information is needed for new parquet?
The aim is appropriate cleaning, not refinishing. Identify the material, explain when it was installed and flag anything the supplier says should not be used. Check the floor care guidance rather than choosing a cleaning method from appearance.
What if dust reached an adjoining room?
Follow the evidence across thresholds and ledges. The additional room should be named in the enquiry so time and access can be considered. Here, inspect the empty flat awaiting furniture.
Are cleaning materials included in the starting guide?
Use £29 per hour as the starting reference, not a guaranteed project total. Surface condition and practical access help determine the time; cleaning materials and equipment are included.
What if some rooms are still unfinished?
Tell Alesta which trades are returning and what they will do. Dust-producing work after a clean may change the sensible sequence; do not assume later deposits are included in the visit.
Is rubble included in the hourly cleaning scope?
A room must have accessible areas for its surface work. If materials remain, explain them before finalising either collection or cleaning.
Do extras need their own scope?
A separate request lets Alesta address limitations honestly. This is particularly important for bonded marks on newly installed glass.
How much time should I leave before the next use?
There is no standard duration for every property. Give the intended next use and the actual condition; drying instructions for finishes remain separate from the cleaning timetable. Inspect the floor perimeter while it remains accessible.
Does the clean repair a damaged finish?
The original material may set the boundary of what cleaning can achieve. Do not confuse that limit with a promise of repair.
Your project / the final clean
Discuss the empty flat awaiting furniture
Describe the rooms being released and the work still outstanding. Keep extra requirements visible so the quotation can address them.
