The return to an empty flat
An empty flat still needs its approach and connecting spaces included where dust is visible.
St James’s · Cabinet detail before the room is furnished
St James’s After Builders Cleaning Before Furnishing
Cabinet detail before the room is furnished.
Agree the clean before furniture makes low edges harder to reach.
New storage can look finished while dust remains on its outside edges and adjacent flooring. For your St James’s enquiry, describe the unfurnished room around fitted storage. Do not assume internal compartments or removal of protective film are included.
- Include coated cabinet fronts and shelf lips in the surface notes.
- Do not assume internal compartments or removal of protective film are included.
- Choose the entrance that keeps equipment clear of delivered boxes.
- Agree the clean before furniture makes low edges harder to reach.
PROPERTY / ST JAMES’SFINISHING BRIEF
ProjectRenovation complete
Next stageDetailed clean
GoalReady for use
Rooms → agree scopeSurfaces → check finishAccess → confirm
Illustrative renovation scene; no customer job or measured result is represented.
Different project briefs
St James’s: choose the relevant project detail
A refitted kitchen
External units and surrounding floor edges can need attention after installation.
A renovated bathroom
Check the readiness of sealants before discussing tiles and sanitaryware detail.
The whole-home room schedule
Separate the released rooms from areas still occupied by tools or materials.
A landlord’s post-work enquiry
Tenant turnover does not automatically turn this into an end-of-tenancy checklist.
Enquiring about fit-out cleaning
Alesta must confirm suitability for the premises and any requested project coordination.
A useful distinction
A completed installation still needs a readiness check
Builder stage
Close the dusty work
- Confirm which trades are finished and which may return.
- Clear obstructions from the edges requested for cleaning.
- Do not schedule contact cleaning on finishes still curing.
Cleaning stage
Release the room detail
- Agree the accessible surfaces before the visit is arranged.
- Flag existing damage so it is not mistaken for dirt.
- Discuss the completed cleaning against the original brief.
St James’s / the specific room brief
Cabinet detail before the room is furnished
New storage can look finished while dust remains on its outside edges and adjacent flooring.
This St James’s planning example centres on interior refresh before furnishing. New storage can look finished while dust remains on its outside edges and adjacent flooring. The useful inspection route follows the unfurnished room around fitted storage, with attention to coated cabinet fronts and shelf lips.
Do not assume internal compartments or removal of protective film are included. Keep any care notes for cabinet coatings available when discussing the visible marks.
Choose the entrance that keeps equipment clear of delivered boxes. Agree the clean before furniture makes low edges harder to reach.
A scoped quote
The starting rate needs a surface list
From £29/ hour
Cleaning materials and equipment are included; confirm the current rate with the proposed work.
Explain the room sizes, access and finishes before expecting a total. Specialist issues and building materials need their own scope.
| Project | Pricing basis | What to describe |
|---|---|---|
| Smaller refurbishment | From £29/hour; scope confirmed | Finish readiness and access to details |
| Kitchen or bathroom work | From £29/hour; scope confirmed | Installed surfaces and any fitting marks |
| Whole-property renovation | Quote after the room scope is reviewed | Floor materials and accessible detail |
| Commercial refurbishment enquiry | Discuss premises before a quote | Coordination needs requiring confirmation |
Based on Alesta’s published after builders cleaning rate. Building waste removal is quoted separately.
Start with the work
Which completed work best describes the project?
Use a category as a starting point, not a promise that all listed work applies to the property.
Full renovation
For extensive works, note the sequence in which areas become available. Match cleaning priorities to released surfaces and their care requirements.
Beyond the work zone
The dust boundary can outgrow the renovation
A clean-looking centre can hide dusty edges.
A narrow approach can connect several spaces. Describe visible dust there even if the contractor worked behind one closed door.
Explain which coverings remained in place and which surfaces are exposed now. Accessible tasks can then be agreed realistically.
Tell Alesta about unfinished tasks instead of assuming the clean covers deposits created afterwards.
The dust route
Four places to look after the tools leave
A property inspection may reveal different priorities from those pictured here.
Ledges & surfaces
External shelves and sill tops can reveal deposits missed from the doorway.
Frames & edges
A fitted room has edges behind and beside units that need an access check.
Fittings & fixtures
Name the fixtures affected by the work so their material and accessibility can be assessed.
Floors & adjoining rooms
The exit route may need attention even where no building work occurred.
Different issues / different scope
Five issues that need different descriptions
| Post-build issue | Example | How it is approached |
|---|---|---|
| Fine dust | Fine material along the room perimeter | Include the affected locations in the scoped tasks. |
| Loose cleaning remnants | Small surface deposits after the work | Ask for affected areas to be recorded in the brief. |
| Adhesive or labels | Transfer left on a cabinet coating | A cleaning method cannot be chosen from appearance alone. |
| Paint, plaster or cement spots | Local deposits attached to the surface | A difficult spot may remain if removal is unsuitable. |
| Protective film | A covered face on a new component | Check installer instructions and confirm whether removal is included. |
Two separate jobs
A finished room is not a waste-loading area
Surfaces ready for attention
Cleaning tackles the post-work condition of specified surfaces, rather than emptying the room of building supplies.
Materials requiring collection
Explain what bulky items remain before a quote is agreed, so cleaning is not confused with removal.
Discuss building waste disposal ↗Room-by-room brief
Describe the fittings inside the room
Kitchen
Identify newly installed worktops and the surrounding suitable floor care, with residue assessed against its surface.
Bathroom
Explain the readiness of new sealants and the accessible fixture surfaces proposed for cleaning.
Bedrooms
Include the exposed surfaces affected by renovation, with any separate storage detail identified.
Living areas
Include the living-space edges affected by nearby work and identify unusual finishes before methods are discussed.
Protect the new finish
Choose the method around the material
Illustrative surface review.
Manufacturer guidance matters more than a finish looking dry.
An apparently minor mark may sit on a sensitive coating. Check the surface specification before including removal in the request.
Paint & sealants
Keep newly applied sealants outside cleaning work until their instructions permit it.
Stone, timber & tiles
Flag transitions between finishes before suitable floor care is agreed.
Metal, glass & cabinetry
Explain which faces of the fitted units are accessible for the agreed clean.
The final-stage sequence
Keep the finishing stage in order
Work completed
Set out what has finished and what remains.
Detailed clean
Address the identified deposits within the agreed work.
Final review
Compare completed detail with the agreed priorities.
Coordinate the next step
Coordinate the intended return to the rooms.
These images explain stages; they do not show one verified customer project or promise an identical outcome.
At a glance
Scope, readiness and price in brief
- What rate is published for the service?
- Use £29 per hour as the published starting guide only; the condition and proposed cleaning time still need agreement.
- What detail should the room list cover?
- Cleaning detail is agreed around the affected rooms; the presence of a kitchen or bathroom does not imply an unlimited checklist.
- When is a useful point to arrange the clean?
- Confirm both clear access and surface readiness before the visit; construction completion alone is not enough information.
- Is cement residue part of ordinary cleaning?
- The underlying coating sets the limit. Any difficult deposit should be flagged before cleaning is agreed.
- Are boards and timber part of the clean?
- Clear tools and identify remaining bulky items; waste removal is another service enquiry.
- Can the clean follow kitchen fitting?
- A kitchen can be discussed within the post-build scope. Identify new finishes and any separate requirements.
- Is decorating alone a suitable project?
- A small paint project still needs suitable surface care; discuss its residue after the product’s drying requirements are met.
- How much time should be allowed?
- Detailed edges or difficult access can matter as much as floor area, so duration needs a scope review.
- What should I say about window work?
- Windows are an additional discussion, particularly where exterior access or hardened marks are involved.
- What preparation helps the finishing clean?
- The contractor should release accessible rooms without equipment blocking the surfaces proposed for cleaning.
Build your brief
Prepare the enquiry without guessing a total
Keep the initial enquiry concrete and useful.
The page creates a private planning note only. It does not transmit data, calculate a quote or reserve a cleaning slot.
The output does not judge surface condition. Discuss its details directly, including separate waste and window requirements where relevant.
Discuss the brief: 020 3608 3976Who is planning the handover?
Make the handover conversation clear
Homeowners
Tell Alesta where you are still living and what can be made accessible after the works.
Landlords & property managers
Provide a clear point of contact for the post-work scope and keep any unrelated inspection duties separate.
Builders & contractors
Describe remaining trades and site access, then ask about project coordination; contractor arrangements require confirmation.
Glass after renovation
Separate frame dust from deposits on glazing
Tell Alesta where the glass is and how it can be reached; additional window work requires confirmation.
A glazing enquiry should identify stubborn spots individually, without assuming every residue can safely be removed.
Plan separate window cleaning ↗Service-area planning
Service enquiries for St James’s
Use the map to locate the St James’s service area, not an Alesta branch. Provide the actual address when asking about access and appointment availability.
For another nearby area, contact Alesta through the main after builders service to confirm coverage and availability.
After Builders Cleaning Near St James's
Before the appointment
Questions about planning the St James’s clean
How do I describe interior refresh before furnishing?
Describe the last activity in the space and the surfaces it affected. This avoids asking for a package unrelated to the condition on arrival. New storage can look finished while dust remains on its outside edges and adjacent flooring.
How should entry to the St James’s property be arranged?
Do not rely on the postcode to explain access. Tell Alesta how the property is entered and which internal areas are available at the proposed time. Choose the entrance that keeps equipment clear of delivered boxes.
Can fitting marks on cabinet coatings be treated?
A finish can be newly installed without being ready for cleaning. Check its care guidance, explain the visible residue and avoid assuming that every mark can safely disappear. Do not assume internal compartments or removal of protective film are included.
Are protected rooms automatically excluded?
The brief can cross the building-work boundary. That should follow the condition observed, not an automatic assumption about the entire property. Here, inspect the unfurnished room around fitted storage.
Is £29/hour a complete project price?
The published guide begins at £29/hour, with cleaning equipment and materials included. The figure is not a total for the property: condition, access and required detail still need review.
What if some rooms are still unfinished?
If the project schedule changes, raise it before the cleaning date. Ready surfaces, clear access and an end to dusty work all affect the arrangement.
Does cleaning include leftover materials?
Rubble and leftover building supplies need their own quotation discussion. A room full of materials is not equivalent to an accessible room with settled dust.
Can building residue on glass be guaranteed to lift?
No. A mark from installation may be bonded to the glazing, and suitable treatment depends on the surface. Include its location and condition in a separate window enquiry rather than assuming an ordinary clean will remove it.
Should furniture delivery wait for the room review?
Timing needs both the work list and readiness information. A dry-looking coating or small room does not establish how long the visit should take. Agree the clean before furniture makes low edges harder to reach.
Should an installer review a remaining fitting mark?
Discuss the remaining deposit rather than repeatedly treating it. Some finishes need supplier advice or a separately scoped specialist approach.
Your project / the final clean
Discuss the unfurnished room around fitted storage
Bring the work history and material notes rather than an assumed package. Confirm the tasks and arrangements before proceeding.
